Hosts for the New Lab
It was a long time coming, buying proper Lab hardware. If you read my post here, then you know the state of my Lab prior to the rebuild. It was after reading a couple of Blogs by Florian @virten, one of which was https://www.virten.net/2018/05/esxi-on-7th-gen-intel-nuc-kaby-lake-dawson-canyon/, that I decided on the Intel NUC.
It's performed exceptionally well, and met my requirements of, remote vPro/ilo connectivity, as well as low power consumption. I have two in operation, servicing the lab, and am quite happy with the speed/performance, as well as, the ease of upgrade/install.
As I've mentioned in prior posts, you don't need a bunch of expensive hardware to learn, and have a working lab. It's just easier to configure, and allows you to run more virtual machines at one time.
Lab along with me, and I hope you enjoy!
Lab Intel NUC HW Build
All the parts have arrived. Let the fun begin.
The NUC in the palm of my hand for comparison. It feels heavy and well made, even empty.
Bottom unscrewed, and bottom/drive chassis set off to the back. Everything was very accessible, making it easily upgradable.
Unplugged the drive vhassis, and moving it aside, to install the SSD.
Bottom unscrewed, the drive chassis unplugged, and removed. DIMM Slots on the right, NVMe slot on the left.
Installing the WD SSD in the drive chassis
With the Corsair 2x16GB Vengeance DDR4 Installed.
With the Samsung 970 Pro 512GB NVMe Installed
Samsung 970 Pro 512GB NVMe PCIe M.2 2280 SSD (MZ-V7P512BW)
Corsair CMSX32GX4M2A2400C16 Vengeance 32GB (2x16GB) 260-Pin DDR4 SO-DIMM DDR4 2400 (PC4 19200) Memory
Intel NUC 7 Business Mini PC Kit Tall with vPro Technology (BLKNUCi7DNH1E)
WD Blue 3D NAND 1TB PC SSD SATA III 6GB/s 2.5"/7mm Solid State Drive WDS100T2B0A